Check air filter

DIY Furnace Troubleshooting

One of the most important parts of the winter is staying cozy and warm. Of course, staying comfortable is important throughout the year, but during the cold it is even more essential. Winters in Paso Robles are always changing and the frostiest days can often appear on us, sometimes when your furnace is ill-equipped. So, before you ask an expert technician, here are a few things you can check first:

  1. Check your filter – unclean filters are one of the most common causes of unforeseen furnace failures. Air has a harder time traveling through filters once they are filthy or dirty, causing the system to switch off often times. The older the furnace, the more difficult it might be to find the problem, while newer furnaces are created to find clogged and dirty filters before further issues arise. Replacing furnace filters every month or so can ward off these troubles and keep you comfy.
  2. See if your batteries are weak or dead – keep incessant tabs on your thermostat batteries to make sure that there isn’t a flashing low battery light or marker on your thermostat. If there is, it’s time to replace out the batteries on your thermostat.
  3. Ensure that your thermostat is set to “heat” – it can be easy to overlook minor things like the settings of your thermostat. Verify this important step, especially if there was a relevant spike in temperature that may have caused you to switch off the “heat” setting.
  4. Check your switches – in your home’s circuit breaker panel, discover the breakers that control your furnace:
    1. [Ensure|Guarantee|Confirm]48] that the switch is in the On spot. If it is Off or in the middle of the two sides, change the breaker to Off and then reset it to On.
    2. The switch that seems like a light switch should also be in the On, or Up, side. It can often be mistaken for a real light switch, which is why it is often the difficulty with furnace troubleshooting. Once it’s back On, the system will only take a few minutes to reboot.

Walking through these steps is an easy and effective way of checking the effectiveness of your furnace before you set-up a call to your Paso Robles professional. If there are still issues after you have worked through these steps, you will have a much wider idea on how to inform your [[technicians|specialists|experts}69] on what the problem might be. If you have questions or need to arrange a repair, call Paso Robles Heating and Air in Paso Robles or reach out online assistance.